62
SP400RF
Programming Guide
SYMBOLOGY
SELECTION
STD 2 OF 5 CHECK DIGIT AND VARIABLE LENGTH LABEL SELECTIONS
These programming labels determine whether you compute and send the
check digit contents.
If you want to set the scanner to read only fixed length labels, follow the
procedures on the pages immediately following.
SET -------------------------------------
DON'T COMPUTE----------------
COMPUTE----------------------
DON'T TRANSMIT ---------------
TRANSMIT ---------------------
ENABLE------------------------
DISABLE-----------------------
END -------------------------------------
SETTING STANDARD 2 OF 5 FIXED AND MINIMUN LABEL LENGTHS
All interfaces that are shipped with the standard factory configuration are
set to read variable length labels. If you switch from variable to fixed
length labels, the default fixed label lengths are 14 digits and 8 digits.
Follow the steps below to change these defaults.
CHECK DIGIT
VARIABLE LENGTH
LABELS