PSC SP400rf manual Data Bits Start Bit Parity Bits Stop Bits

INTERFACE

RS-232

BAUD RATE

Use the barcodes on this page to select the communications Baud Rate. Only one Baud Rate selection may be active at any one time. The last Baud Rate label you scan during a programming session will be the setting that is stored when you scan the END label.

SET	------------------------------------
	= 1200 ----------------------
	= 2400 ----------------------
ATE	= 4800 ----------------------
BAUD R	= 9600 ----------------------
	= 19200 --------------------
	= 38400 --------------------
END	-------------------------------------

DATA FORMAT TABLE

There are many possible data format configurations for an RS-232 interface. Check your host system manual to find out your system's communications requirements. This table shows the acceptable format options.

Data Bits	Start Bit	Parity Bit(s)	Stop Bit(s)
Seven	1	0	2
Seven	1	1	1
Seven	1	1	2
Eight	1	0	1
Eight	1	0	2
Eight	1	1	1

16 SP400RF Programming Guide