IBM 4683/84 • 4693/94 PORT 9A, 9B, 9C, 9E I/F SELECTION
Scan this label to enable the IBM 468x/9x Port 9x interface.
IBM 4683/84 • 4693/94 PORT 9A, 9B, 9C, 9E SETTINGS
Data Format: Send As Code 39 — converts barcode data (UPC/EAN,
These settings are for IBM 4683/84 • 4693/94 Port 9A, 9B, 9C, 9E inter- face ONLY.
Limit Command Set — is an option that causes the scanner to ignore 'enable scanner' and 'disable scanner' commands sent from the host.
Transmit Unsolicited Status1 — when enabled, this option causes the scanner to transmit a status message to the host upon receipt of a "Set Normal Response Mode" (SNRM) command, and after scanner transmission of a "Non Sequenced Acknowledge" (NSA) response.
SET -------------------------------------
SEND AS CODE 39 ------------
DON'T SEND AS CODE
FORMATENABLE LIMIT COMMAND SET
DATA
DISABLE LIMIT COMMAND SET
TRANSMIT UNSOLICITED STATUS -
DON'T TRANSMIT UNSOLICITED STATUS
END -------------------------------------
1 For this IBM interface, the setting for Unsolicited Status is normally Disabled.
IBM INTERFACES
9 |
