STI KEYBOARD WEDGE INTERFACE SELECTION
Scan this label to enable the STI Keyboard Wedge interface.
KEYBOARD WEDGE INTERFACE
IMPORTANT 
When enabling the STI Keyboard Wedge interface, certain parameters must be set to ensure proper communication with the wedge. Reference the tables below for these requirements. When all required parameters have been set for the interface, the entire set of STI Keyboard Wedge programmable features can be accessed using either the Master® BB+ Universal Programming Guide or the VS/HS Keyboard Wedge Program- ming Guide (P/N
|
| Section of this Manual |
| |
| Label Transmit | General Features | Code 39 Symbology | |
|
| Format Config |
|
|
|
|
|
|
|
| Baud = 9600 | Prefix = None | STX = None | Symbology = Enable |
| Parity = Even | Suffix = Carriage | ETX = None | Check Digit Calc = |
|
| Return (0xOD) |
| Don’ t Calculate |
| Stop Bits = 1 | Label ID = None | ACK /NAK for | Check Digit = Don’ t |
|
| (except IBMXXXX. | Labels = Disable | Send |
|
| See below) |
|
|
| Data Bits = Seven |
| ACK /NAK for | Start/Stop Character = |
|
|
| Commands = | Don’ t Send |
|
|
| Disable |
|
| Hardware Control |
| Label ON/OFF File | Read One Char Label |
| = None |
| = Disable | = Disable |
| Xon/Xoff =Disable |
|
| C39 Min Length = 1 |
|
|
|
| C39 Full ASCII = |
|
|
|
| Disable |
IBMXXXX STI WEDGE
The IBMXXXX STI Wedge has the exception that the Label ID must be enabled as a Prefix using the standard default value for the symbology to be used
26 | SP400RF Programming Guide |
