CODABAR FIXED LENGTH
SYMBOLOGY
SELECTION
All interfaces that are shipped with the standard factory settings are set to read variable length labels for Codabar. If you switch from variable to fixed length labels, the factory set fixed label lengths are 14 and 8. Follow the steps below to change these defaults.
ENABLE FIXED
1.Identify the fixed length settings you want to make.
2.Scan the SET label.
3.Scan the Set First Fixed Length label.
SETTING LENGTHS
If you are setting a length less than ten, you must scan a zero first and then the length digit (02, ...09).
4.Set the first fixed length label by scanning the correct digits from the next page.
If you need to set a second fixed length, continue with step five. If you do not need to set a second fixed length scan the No 2nd Fixed Length label below and skip to step seven.
SET |
CODABAR |
SET FIRST FIXED LENGTH
SET SECOND FIXED LENGTH
NO SECOND FIXED LENGTH
68 | SP400RF Programming Guide |
