PSC SP400rf manual Interface Type, Upc/Ean, Code

SYMBOLOGIES

Symbology selection (barcode type) determines which symbologies the scanner will decode. The chart below shows the symbologies that are supported by each interface. Once you have identified the symbologies you wish to enable, turn to the following pages, enable those symbologies and set the data format options (e.g. check digit, start/stop characters) required by your host system for each symbology type. You must enable the symbology format options settings that are compatible with your host system.

The factory settings for each interface were chosen to meet the standard industry requirements and in most cases you will not need to change the symbology format settings. If you are unsure of your system require- ments, test the scanner using the factory settings before making any changes.

		SYMBOLOGIES
			SUPPORTED
INTERFACE TYPE	UPC/EAN	Code 39	Inter. 2 of 5 Std 2 of 5 Codabar Code 93 Code 128	MSI/Plessey

IBM Port 5B

IBM Port 9B

IBM Port E

NCR OCIA (8 bit)

NCR OCIA (9 bit)

S-P OCIA

SNI OCIA

RS-232

Wand Emulation

Keyboard Wedge

SYMBOLOGY SELECTION

R44-1027 41