Advanced setup description | Q-See QSC26404 specs

QSC26404 User’s Manual

Remote Host IP and Port: If you set this IP and port, when there is an alarm and exception happens, the DVR will send information to that host IP. The center with this IP can receive alarm and exception information from the DVR. You can use SDK to develop this center software.

HttpPort: The port is for IE browser. The default value is 80. It can be modified.

Advanced setup: Move “Active frame” to “Advanced” then press “enter” to enter into the configure interface as shown in fig 5.28

Fig 5.28 Advanced network setup

Advanced setup description :

NIC type: Default is “10M/100M Auto”, the other options are: 10M Half-Dup, 10M Full-Dup, 100M Half-Dup and 100M Full-Dup.

IP server address: If DVR uses PPPoE function, it can get one dynamic IP address. If you set DNS IP with one fixed Internet IP, the DVR will send some information such as DVR name, DVR serial number, DVR current IP to that fixed IP address. We call that fixed Internet IP the DNS IP. The DNS server with that fixed Internet IP address can receive DVR information and use it to resolve DVR dynamic IP.

This IP server is special software, not the normal domain name server. You can use the available SDK to develop this DNS software.

DNS IP : Get your DNS IP from your ISP . Fill in this item in order to get access to a remote server with a domain name.

Multicast IP: It is one D-class IP address, from 224.0.0.0 to 239.255.255.255. If you do not use the multicast function, you do not need to set this. Some routers will prohibit multicast function in case of a network storm.

63

Image 63

Q-See QSC26404 user manual Advanced setup description

Contents

QSC26404 Net DVR V2.1 Index Chapter Appendix D Website Customer Service Storage Functions Product Introduction Preview & Playback Functions Network FunctionsOthers Installation Checking the DVR and Its AccessoriesHard Drive HDD Installation QSC26404 Rear Panel Rear Panel Description Operational Instructions Front PanelIndex Type Name Description Shift Index Name Description IR Remote Control Powering Down the DVR Loading the Batteries Into the Remote ControlStarting the Remote Control Disabling the Remote Control Menu Description Menu Items How to Enter Into Menu Mode Menu OperationMain Menu Description QSC26404 User’s Manual Input Text How to Exit Menu Preview Basic Operation Guide Power On Icon Icon Color Status Description Recording status Form 4-1 Camera record status Alarm status User Name and Password LoginChange Password QSC26404 User’s Manual PTZ Control Interface PTZ Pan, Tilt, Zoom Control Adjust Preset Description Select ChannelPTZ Control Keys Description Start/Stop Auto in PTZ Control Mode Exit PTZ Control ModeManual Record Description Playback Description QSC26404 User’s Manual Control Bar Functions Playback With Mouse Attached Backup Daily Recorded Files Backup Recorded Files Select backup device Playback the video segment Shutting Down the DVR Parameters Setup Guide Administrator and PasswordPassword Modification User management Add and Delete Users Add UserEnter into User Management menu shown in fig Add new user name Setup the password for new user Save the new user’s password and rights Setup the rights for new user Delete User User rights description LocalRemote through network or internet MAC Address Unit Name Unit Name and Device ID Video Output Standard Video Output Standard and VGA SetupVGA setup Device ID Camera Name Position Camera Name System Time MM DD YY MM DD YY YY MM DD Date OSD Position Video Parameters Setup 12 Color setup Mask Area Setup Disabling the mask check box cancels the mask area Enter into Camera menu View Tampering Alarm Video Loss Alarm 【ESC】key to abort Interface shown as fig Motion Detection Clear motion area QSC26404 User’s Manual Preview Properties Preview properties Recording menu description Recording Setup All day recording setup Enter into recording schedule menu Select a day and enable all day recording optionBit Rate Type Copy to other days Select one day and disable all day recording optionSetup time period and record type Record type Enter into Alarm in Handling sub menu External Alarm Input and Relay OutputExternal alarm input setup Alarm type Save setup Alarm trigger record channel setupSchedule for alarm handle method Alarm handle method PTZ Linkage Setup alarm out schedule Alarm relay output setupSelect delay time Enter into alarm out schedule Exceptions Network menu description Network Parameters Advanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, Zoom Preset setup Sequence setup Cruise setup Utilities Restore Parameters Upgrade Hard Disk Management Stop Alarm OutReboot Power Off By Type View Log For example The steps of viewing alarm log By TimeBy Type&Date System Information FTP Server Setup Firmware Upgrade Setup username Upgrade Mode Moving Drag the left keySingle click the left key Right click Scroll wheel forward Click the right key = d i ⎟ 8⋅ 3600 ⎟1024 Appendix B HDD Capacity Calculation Appendix C DVR Connect Cable Definition Material and toolRJ45 introduction Pin definition QSC26404 User’s Manual Model Name QSC26404 Appendix D Specifications Failure Possible reasons Appendix E Troubleshooting Appendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service