Q-See QSC26404 user manual Preset setup

QSC26404 User’s Manual

Note: In the DVR “PTZ” menu, if you select Pelco-P protocol when you setup PTZ address please plus or minus one compared with Camera ID. For example, if camera ID is 2, the DVR PTZ address is set as ID 3.

Preset setup: Preset is using one number to represent the camera’s position, zoom, focus and

iris. Move the “Active Frame” to “Setup” button on the right side of “Preset”, press【ENTER】key

to enter into preset setup menu. You can save 128 preset numbers. Please make sure the PTZ camera you are using supports the preset function before you setup preset.

Sequence setup: Each sequence is made up of several cruise points. Each cruise point includes one preset number, dwell time and dwell speed. Please make sure the PTZ camera you are using can support the sequence function before you start to setup. You can save 16 sequences.

Cruise setup: Cruise is remembering the track of PTZ movement. Please make sure the PTZ camera you are using can support the cruise function.

Preset setup

In “PTZ” menu, move the “Active Frame” to “Setup” button on the right side of “Preset”

item, press【ENTER】, you can enter into “Preset” setup menu as shown in fig 5.30

Fig 5.30 PTZ preset setup

68