Q-See QSC26404 user manual Sequence setup

QSC26404 User’s Manual

Add preset number: You can input preset number (among 1-128) in the edit box. Then press the “Adjust” button to enter into PTZ control interface. In PTZ control interface, you can use

direction keys to adjust PTZ position, and use【IRIS+】【IRIS-】【FOCUS+】【FOCUS-】【ZOOM+】

【ZOOM-】keys to adjust iris, focus and zoom. After you finish adjusting, press【ENTER】, then

press the “Save” button to save the preset number. You can repeat this step to setup other preset numbers.

After you setup all preset numbers, press the “Return” button to return to the “PTZ” menu. In “PTZ” menu, press “Confirm” button to save all parameters.

Delete preset number: In “Preset” setup menu, input one preset number, press “Delete” button, you will delete this preset number.

After deleting, press the “Return” button to return to the “PTZ” menu. In “PTZ” menu, press “Confirm” button to save all modifications.

Note: Please make sure the PTZ camera you are using can support the preset function.

Sequence setup

In “PTZ” menu, press “Setup” button on the right side of “Sequence No”, you will enter into the “Sequence” setup menu as shown in fig 5.31

Fig 5.31 PTZ sequence setup

69