Quadra-Fire 7100FP-BK-B, 7100FP-NL-B warranty 7100FP EPA Woodburning Fireplace Brick Replacement

7100FP EPA Woodburning Fireplace									R
C. Brick Replacement
The firebox of your fireplace is lined with high quality
firebrick, which has exceptional insulating properties.
There is no need to use a grate; simply build a fire
on the firebox floor. Do not operate the fireplace
without firebrick.				5
IMPORTANT: The bricks are very similar in size. Be			5		5	5	5	5	5
certain you have the proper brick in the correct location.		5							5
Measure the brick size for accuracy.
				5	5	5	5	5
			1						1
1. After the coals are completely cooled, remove		5							5
	all old brick and ash from unit and vacuum out	3							3
	firebox.		2		2	2	2	2
		4
2.	Remove the brick from the box and lay out to
	diagram as shown in Figure 58.1.
3. Lay bottom bricks in unit.								4
4. Install rear bricks on the top of the bottom bricks.		Figure 58.1		Brick Pattern
	Slide top of bricks under clip on back of firebox
	wall and push bottom of brick back.	Use Part 832-2370 when ordering individual brick. Pro-
5.	Install side bricks. Slide top of brick under clips
		vide brick dimension or copy this page, mark the desired
	on side of firebox and push the bottom of the brick
		brick and take it to your authorized dealer.
	until it is flush with the side of the unit.

		5	5	5	5	5
Left Side				Back				Right Side
5								5
5	1	5	5	5	5	5	1	5
5								5
	4	2	2	2	2	2	4
3				Floor				3
Figure 58.2	Brick Pattern

#	Brick Size	Qty. In Set
1	9” x 3-1/4” x 1-1/4” Angled (see drawing)	2
2	6-1/4” x 4-1/2” x 1-1/4”	5
3	9” x 2” x 1-1/4”	2
4	6-1/4” x 3-1/2” x 1-1/4”	2
5	9” x 4.5” x 1-1/4”	16

9.0"

3-1/4"1

1-1/4"

Page 58 433-1390D September 7, 2007