Quadra-Fire 7100FP-GD-B and Welcome to the Quadra-FireFamily, 7100FP EPA Woodburning Fireplace

R

7100FP EPA Woodburning Fireplace

and Welcome to the Quadra-Fire Family!

Hearth & Home Technologies welcomes you to our tradition of excellence! In choosing a Quadra-Fire appliance, you have our assurance of commitment to quality, durability, and performance.

This commitment begins with our research of the market, including ‘Voice of the Customer’ contacts, ensuring we make products that will satisfy your needs. Our Research and Development facility then employs the world’s most advanced technology to achieve the optimum operation of our stoves, inserts and fireplaces. And yet we are old- fashioned when it comes to craftsmanship. Each unit is

meticulously fabricated and gold and nickel surfaces are hand-finished for lasting beauty and enjoyment. Our pledge to quality is completed as each model undergoes a quality control inspection. From design, to fabrication, to shipping: Our guarantee of quality is more than a word, it’s Quadra- Fire tradition, and we proudly back this tradition with a Lim- ited Lifetime Warranty.

We wish you and your family many years of enjoyment in the warmth and comfort of your hearth appliance. Thank you for choosing Quadra-Fire.

With warm regards,

___________________________		___________________________	_________________________	___________________________
Alan Trusler		Dan Henry
	t		Jason Olmstead	Steve Tate
Senior		Vice President	Vice President &
Vice President				Quadra-Fire
Dealer Channel		Advanced Technolgies	General Manager
				Brand Manager

SAMPLE: CLEARANCE TO COMBUSTIBLES LABEL

LOCATION: on hang tag on right side of fireplace

				Model:
	Tested and	Beaverton	R
	Listed by	Oregon USA							Serial No / Numéro De Série
	C	US							007
	Report #061-S-41-2
	OMNI- Test Laboratories, Inc.
	TESTED TO:
	UL 127,	ULC-S610-M87
	LISTED FIREPLACE, SOLID FUEL TYPE, ALSO SUITABLE FOR MOBILE				Minimum Clearances To Combustible Material
HOME INSTALLATION. (UM) 84 HUD. "For Use with Solid Wood Fuel Only."					Chimney sections at any level require a 2” (51mm) minimum
Install and use only in accordance with manufacturer's installation, venting and operating instructions.
					air space clearance between the framing and chimney section.
Any area incorporating warm or cold air ducts shall be enclosed in accordance with the manufacturer's
						ENCLOSURE AREA
installation instructions.
Contact Your Local Building Or Fire Officials Or Authority Having Jurisdiction About Restrictions,							Appliance to backwall			1/2" (13mm)
Installation Inspection And Permits Required In Your Area.							Appliance to sidewall			1" (25mm)
WARNING - For Mobile Homes: Do not install in a sleeping room. An outside combustion air inlet								boots to framing		0" (0mm)
must be provided and unrestricted while unit is in use. The structural integrity of the mobile home floor,								standoffs to header		0" (0mm")
ceiling and walls must be maintained. The fireplace needs to be properly grounded to the frame
mobile home.					EXPOSED SURFACES
Components required for installation: HTI SLSeries Pipe or Dura Plus System, Termination Cap,
							Faceplate to sidewall			16" (406mm)
Extension and required accessory Chimney Air Kit Part CAK4A.
							Remote outlet air grills to ceiling			12" (305mm)
Do not connect this unit to a chimney serving another appliance.
DANGER: Risk of electrical shock. Disconnect power supply before servicing.					MANTEL
Electrical Rating: 115 VAC <3.0 AMPS 60 Hz							Mantel from base of fireplace			60" (1524mm)
Do not use grate or elevate fire. Build wood fire directly on firebrick.							Maximum mantel depth			12" (305mm)
Do not overfire. If heater or chimney connector glows, you are overfiring.
Do not use a fireplace insert or other products not specified for use with this product.					FLOOR PROTECTION
WARNING - THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED GAS LOG SET OR ANY LOG SET.
TO REDUCE RISK OF FIRE OR INJURY, DO NOT INSTALL AN UNVENTED GAS LOG SET OR ANY LOG SET					Combustible flooring 20" (508mm) in front of and 8" (203mm) to
INTO FIREPLACE.
					either side of the fuel opening must be insulated with
Must provide a source of air to prevent air starvation from combustion which could result of high levels
					non-combustible floor protection with a minimum thickness of 1"
of carbon monoxide.
					(25mm) and ("k" value = 0.43).
Replace glass only with 5mm ceramic available from your dealer.
Optional Fire Screen Part Mesh-EPA, may be used ONLY in USA					In Canada: The hearth extension must be installed according to
Product covered by US Patents 4,766,876; 5, 113,843; 5,341,794
Patent pending					the installation instructions.

U.S. ENVIRONMENTAL PROTECTION AGENCY - Certified to comply with July 1990 particulate emission standards.

2007 2008 2009 Jan Feb Mar Apr May June July Aug Sept Oct. Nov. Dec.

Mfg by:

www.quadrafire.com DO NOT REMOVE THIS LABEL Made in U.S.A 433-1400

Serial Number

Model Name

Test Lab

& Report No.

Manufactured Date

Page 2 433-1390D September 7, 2007