oWARNING o

Never connect the audio output line of the headphone jack and a power supply (and GND) line when you use the headphone jack to connect an external speaker. If connected, over current flows to the audio IC of the scanner which causes abnormal high temperature and the scanner might break down.

CONNECTING AN

EXTENSION SPEAKER

In a noisy area, an amplified extension speaker (available at your local RadioShack store) might provide more comfortable listening. Plug the speaker cable’s 1/8-inch (3.5 mm) plug into your scanner’s * jack. Connecting an external speaker disconnects the scanner’s internal speaker.o

ATTACHING THE BELT CLIP

You can attach the supplied belt clip to make your scanner easier to carry when you are on the go. Attach the belt clip to the back of the scanner, then slide it downward until it clicks.

To remove the belt clip, pull up the hook then slide the belt clip.

UNDERSTANDING THE SCANNER

Once you understand a few simple terms used in this manual and familiarize yourself with your scanner’s features, you can put the scanner to work for you. You simply determine the type of communications you want to receive, then set the scanner to scan them.

Your scanner comes pre-loaded with recent frequencies for race drivers.

14