Ô NOTES Ô

•If you program a weather frequency into the priority channel and the scanner detects a WX alert tone on that frequency, the scanner sounds the alert tone and Weather

Alert! appears. Press any key except õ/î to turn off the alarm.

•If you program a weather frequency into the priority channel, P:WX appears instead of

P:ON.

•If you set on the tone squelch, P:CT appears instead of P:ON.

priority channel for activity every 2 seconds.

1.Press and hold FUNC about 2 seconds. The menu screen appears on the display.

2.Press 5 to select

PGM PRI CH and then press 1 to select Program Freq. The cursor blinks at the second line.

3.Use the number keys and

./CLEAR to enter the priority frequency (including the decimal point).

4.Press ENT to set the priority channel. If the entered

frequency is incorrect, Invalid Freq. briefly appears in the scanner's display.

To turn on the priority feature, press FUNC then 1/PRI while scanning. P:OFF (Pri: Off) changes to P:ON (Pri: On). The scanner checks the priority channel every 2

seconds and stays on the channel if there is activity. Pri. Channel and

the frequency appear whenever the scanner is set to the priority channel.

To turn off the priority feature, press FUNC then 1/PRI. P:ON changes to P:OFF.Ô

DELAY

Many agencies use a two-way radio system that has a period of several seconds between a query and a reply. To avoid missing a reply, you can use a 2-second delay during scanning, tuning, or

50