searching. When your scanner stops on a channel or frequency with a programmed delay, the scanner continues to monitor that frequency for 2 seconds after the transmission stops before resuming scanning, tuning, or searching. Delay is automatically set as the default for each channel or when you tune or search. D appears at the rightmost position on the first line when delay is set.

To turn off or on the 2-second delay in a channel or frequency, press FUNC then press 2/DLY while the scanner is monitoring that channel or frequency.

LOCKING OUT

CHANNELS OR

FREQUENCIES

You can lock out channels to force the scanner to skip and ignore any traffic while scanning. You can also lock out up to 50 frequencies while searching to skip undesired transmissions.Ô

Locking Out Car Number Frequencies

To lock out a car number frequency, press FUNC and then 3/L/OUT. If the scanner is in the car number All Frequency mode, L appears on the top line. If the scanner has other frequencies in the same car number, the next frequency appears. If the scanner

has not other frequencies in the same car number, Locked out!

appears about two seconds.

Ô NOTES Ô

This scanner uses the same memory between conventional channel mode and car number operation. If you remove the conventional channel’s lockout which also locks the channel of a programmed car number, the scanner removes the lockout from the car number operation.

51