Ô NOTES Ô

After you store a car number and a frequency, you can store additional frequencies then associate those frequencies with the same car number. See “Adding Frequencies To a Car Number” on Page 25“

If you add one or more leading zeros to a single digit car number, your scanner recognizes them as different car numbers. For example, you can enter 5 for one car number, 05 for another car number, and 005 for another car number.

Load From Pre-Program CAR Press 1 key ->YES. Other key-> NO appears.

4.Press 1 to program the race frequency or other than 1 to cancel the programming.

STORING A CAR NUMBER AND FREQUENCY

You can store a car number and frequency in each of the scanner's channels, and you can recall any frequencies associated with the car number by entering the number. You can store one car number in each channel (for up to 500 car numbers).Ô

1.Repeatedly press CAR until

Input Car#? appears.

2.Enter the car number. If the number is one or two digits, enter the number then press CAR. If the number is three digits, enter the number only. P.Fr (Program Frequency), the car number, and frequency (or 0.00000 MHz) appears.

3.Enter the frequency (including the decimal point) you want to associate with the car number by using the number keys and

./CLEAR.

To clear the display (if you make a mistake), press and hold ./CLEAR before you press ENT.

4.Press ENT to store the frequency. The car number

24