![](/images/backgrounds/159907/159907-7625x1.png)
and frequency are stored in an available channel.
To program another frequency in the same car number, press ^ or v to recall 0.00000 MHz then repeat Step 3.
When you finish programming, press CAR twice.
Adding Frequencies To a Car Number
1.Select the car number that you want to add the frequency by using CAR and the number keys.
2.Press FUNC then v. P.Fr and
0.00000 MHz appears.
3.Enter the frequency (including the decimal point) you want to associate with the displayed car number by using the number keys and ./CLEAR.
4.Press ENT to store the frequency. The frequency is associated with the car number entered.
Adding a Car Number to the Channel
You can assign the car number after you program the frequency into the channel.Ô
1.Enter the normal car number operation mode.
2.Press FUNC, and then ^ to recall the frequency without car number. The scanner shows C.Fr (Call Frequency)
Ô NOTES Ô
When the scanner is not programmed with frequencies without the car number, the scanner sound an error tone.
25