CHANGING THE DISPLAY CONTRAST

1.Press and hold FUNC for about 2 seconds. The menu screen appears.

2.Press 8 and then 3 to select

3:LCD Contrast.

3.Press < or > to select

LCD contrast. Then press ENT to set the display contrast.

USING CLONE MODE

You can transfer the contents of the scanner’s memory to and from another PRO-99 scanner using an optional connecting cable with

1/8-inch (3.5 mm) phone plugs on both ends (use RadioShack part number 42-2420 available at your local RadioShack store).

Or, you can program your scanner using data you transfer from your personal computer to the scanner using an optional PC application software.

Cloning Data from

Another PRO-99

1.Turn on both scanners.

2.Connect the connecting cable to each scanner's PC/IF jack.

** CLONE MODE ** Press UP to send

Remove cable to exit. appears in the scanner's display.

3.Press ^. Confirm send data?

1 -> YES

Press other key for NO. appears in the scanner's display.

Ô NOTES Ô

Incorrect Model! appears if the scanner receives data from another scanner other than a PRO-99.

57