![](/images/backgrounds/159907/159907-7646x1.png)
5.Enter your desired upper frequency and press ENT.
6.Repeatedly press
SRCH/PAUSE to select
SR6 Limit SRCH. When the scanner finds an active frequency, it stops searching.
USING ZEROMATICYou can set Zeromatic on or off by pressing FUNC and then 9 (Z). Press FUNC, and then 9 again to toggle the Zeromatic setting. In tune mode, when this feature is turned on, Zeromatic ON briefly appears in the display, then z appears at the first digit of the second line. When searching with Zeromatic on, the scanner will automatically tune to the correct center frequency (or the step increment closest to the correct center frequency). When searching or tuning with Zeromatic off, the scanner will unmute faster on a detected signal but the frequency may not be exact. If the scanner stops on a signal before it reaches the correct center frequency, you can step up or down to the correct frequency using the ^ or v key. Zeromatic functions only in search banks 0, 3, 4, 5, 6, and manual tuning.
MANUALLY TUNING A FREQUENCYYou can manually set the scanner to move through all receivable frequencies, or select a specific frequency as a starting point.
1.Set the scanner to the conventional channel mode
46