Channel Storage Banks Off and On” on Page 35 and “Locking Out Channels or Frequencies” on Page 51).
Turning Channel Storage Banks Off and On
To turn off channel storage banks while scanning, press the bank's number key so the bank's number disappears. For example, to turn off bank 1, press 1. The scanner does not scan any of the channels within the banks you turned off.
To turn on channel storage banks while scanning, press the number key until the bank's number appears. For example to turn bank 1 on again, press 1.
You cannot turn off all channel storage banks. There must be at least one active channel storage bank.
You can manually select any channel in a channel storage bank, even if the bank is turned off.
Monitoring a Single Channel
You can monitor a single channel with your scanner by navigating to that channel while in manual mode. The scanner will receive traffic on the selected frequency.
To monitor a single channel, repeatedly press SCAN during conventional channel operation. MAN appears.
35