Ô NOTES Ô

If the car number is three digits, you must not press CAR.

When the specified car number is not programmed, the scanner shows

0.00000 MHz.

When the specified car number was set to lockout, Locked out appears, the scanner shows A.Fr (All Frequency mode), the car number and the frequency.

Car# - - - at the top line. Then press ^ or v to select the frequency that you want to add a car number.Ô

3.Press FUNC the press >.

4.Enter the car number by using the number keys. If you enter 1 or 2 digit, press ENT.

Viewing Frequencies

Associated With a Car

Number

1.Repeatedly press CAR until

Input Car#? appears.

2.Enter the car number. Then press CAR. One of the car

number's frequencies appears.Ô

3.Repeatedly press >. This operation skips locked out frequencies.

If you want to move to another car number frequency, press ^ or v.

Removing a Frequency From a Car Number

1.Recall a car number frequency using CAR, the number key and >.

2.Press SCAN. A.Fr appears.

3.Press 0.

4.Press ENT.

A.Fr (All Frequency)

Mode (In Car Number

Operation)

You can recall all conventional channel frequencies in this mode

26