Clearing All Lockout Channels

1.Set the scanner to the conventional channel manual mode.

2.Press and hold ./CLEAR, and then press 3/L/OUT. All Locked out Channels Clear? Press 1 key ->YES Other key ->NOappears.

3.Press 1 to clear the all lockout channels, or press any key other than 1 to cancel clear.

Locking Out Search Frequencies

To lock out a frequency during a search, press FUNC and then press 3/L/OUT when the scanner stops on that frequency. The scanner locks out the frequency and continues searching.Ô

Reviewing Locked-Out Search Frequencies

You can review the frequencies within a search bank that you locked out:

1.Press and hold FUNC for about 2 seconds.

2.Press 7 to select

Recall Lockout.

3.Select the search bank and press the number key which you want to review all lockout frequencies. The search bank number, the search bank

name, the first lockout frequency, and L/Olist 01 of XX or L/O List ChXX appear on the display.

Ô NOTES Ô

•You can lock out as many as 50 frequencies in each search bank. If you

try to lock out more,

Memory full ! will appear in the display, and you will be unable to lock out any more frequencies until some have been cleared. See “Clearing a Locked- Out Search Frequency” on Page 54.

•If you lock out all frequencies in one search bank and only

this search bank is activated, All ranges Locked out! appears in the display and the scanner will not search.

53