Radio Shack PRO-99 Copying a Frequency Into, a Vacant Channel In a, Specified Bank, MAN, Bank, Tune, Bank, Store, USING FREQUENCY COPY

so MAN, Bank, and a channel appears.

2.Press FUNC then press

^ or v. Tune and the current

frequency appear in the display.

3.Use the number keys to enter the frequency where you want the scanner to start.

4.Press ENT to store the frequency and start tuning.

5.While automatic tuning, press

^ or v to change the direction of the tune. When the scanner

finds an active frequency, it stops on the frequency.Ô

USING FREQUENCY COPY

You can easily copy a frequency into a vacant channel in a specified bank. This feature provides an easy method of storing frequencies of interest you encounter while searching or tuning. You cannot copy a frequency from the Marine and FRS/GMRS/MURS search bands.

Copying a Frequency Into

a Vacant Channel In a

Specified Bank

You can copy a frequency into a vacant channel in a specified bank when the scanner stops on the frequency during search or tune mode.Ô

1.Press FUNC, and then ENT

when you find a frequency you want to copy. Bank 0 (default setting) Store?

Ô NOTES Ô

To pause the tune, press FUNC then SRCH/ PAUSE. Use ^ or v while paused to increment the frequency one step at a time. To resume the tune, press FUNC then

SRCH/PAUSE again.

Ô NOTES Ô

•If you try to copy a frequency that is already stored in the same bank, the scanner sounds a notice tone three times after you press ENT. Dupl.Freq.Chxxx appears at the third line. If you want to copy the duplicate frequency anyway, press ENT, or if not, press ./CLEAR to cancel.

•If the scanner displays Bank X Full !, the bank has no vacant channel.

47