0.00000 MHz appears if the car number has only one frequency. If the car number has more than one frequency, one of the frequencies appears.
^and v — Moves through selected car number frequencies.
You can program a frequency when 0.00000 MHz is displayed. If
the car number frequency is locked out, the scanner will still recall the locked out frequency and L will be displayed at the upper right corner.
<— Enters the text input mode when a frequency is displayed, or after a new frequency has been saved.
>— Moves the cursor to the next right character when you are in text mode. Otherwise this results in an error tone.
Programming a Quiet Code — From normal car number operation mode, press FUNC, and then press <. Qcode XX CT XXX.X appears at the bottom of the screen.
^and v — Moves through Quiet codes and CTCSS frequencies in the selected car number. Press ENT to save the code selection.
29