channel, press FUNC and then 4/CTCSS. CT00:SRCH appears. When the scanner detects the quiet code while receiving a transmission, the detected code flashes on the bottom line.
If you want to enter the detected code into the car number or the channel, press ENT while the code flashes.
Using CTCSS During a Search
You can find the quiet code on frequencies during a search (except SR1 and SR4). While searching through a band, press FUNC then 4/CTCSS. CT00:SRCH appears. When the scanner finds a frequency with a quiet code, the quiet code frequency flashes.
To turn off the CTCSS feature, press FUNC then 4/CTCSS again.
SEARCHING AND TUNING
FINDING AND STORING ACTIVE FREQUENCIES
You can search for transmissions using the scanner's preprogrammed search banks. The search banks include six preprogrammed search ranges, SR0 to SR5. You can change the search range of Bank SR6 manually by setting the lower and higher ends of the search range.Ô
Ô NOTES Ô
•You can use the scanner's delay feature while searching the search bank. See “Delay” on Page 50.
•You can set CTCSS when searching any search range, except for SR1 and SR4.
The scanner will display detected CTCSS codes depending on the CTCSS setting. See “USING CTCSS” on Page 36.
•The scanner does not search
39