2 SpeedTouch™ Local Networking Setup

4The Windows Found New Hardware Wizard appears:

This wizard will guide you through the installation procedure of the USB drivers. Click Next to continue.

5The following window allows you to select locations where it should search for drivers:

Insert the SpeedTouch™ Setup CD-ROM, make sure that the wizard looks for the drivers on the CD-ROM drive and click Next to continue.

6The wizard will notify that it found drivers for the device on the CD-ROM. Click Next to continue.

7The installation procedure continues with the installation of the USB drivers.

8In the following windows you can follow the installation procedure. Click Next whenever requested to continue the installation.

9At the end of the procedure, the following window appears:

Click Finish to complete the installation.

10As a result your USB connection is installed and ready for use.

14

E-DOC-CTC-20040123-0001 v3.0