2 SpeedTouch™ Local Networking Setup
Registering wireless In case New stations are allowed (via registration) is enabled, you can register clients new wireless network clients as follows:
1Push the front panel button on the SpeedTouch™ for 2 seconds or click Register on the SpeedTouch™ Wireless web page (see “ Wireless” on page 55 for more information).
Clicking the Register button triggers the SpeedTouch™ to unlock the ACL for a time frame of one minute, after which the ACL is locked again. All the new wire- less clients successfully attempting to connect to the SpeedTouch™ (having the correct wireless settings (Network Name and, if required, Network key)) will be added to the table as allowed station. The SpeedTouch™ automatically saves your current configuration at the end of the registration phase.
Note Some WLAN clients do not automatically join a WLAN. If so, follow the instructions for the WLAN client software to initiate the associa- tion.
2Successfully registered stations are associated to the SpeedTouch™580 WLAN. Depending on your WLAN client adapter a wireless icon may become green or a message similar to the following may appear: “Successfully joined Wireless net- work SpeedTouch012345”.
3After one minute the ACL is locked.
4You can control if there are successfully registered wireless clients on the Speed- Touch™580 ACL.
Note The registration procedure can be repeated as many as necessary.
22 | |
|