You can also disable your wireless interface by pressing the front panel button for 10 seconds until the WLAN LED goes off. If these settings need to be saved on persistent memory, browse to the web pages and click Save all to save your changes.

5 SpeedTouch™ Web Interface

•Select Framebursting to enhance the performance of wireless networks by improving the efficiency between the client and the wireless access point if you have mainly downstream traffic i.e. from the SpeedTouch™580.

If selected, it becomes active after you click Apply. If cleared, it becomes inactive after you click Apply.

•To disable the SpeedTouch™580 wireless access point: Proceed as follows:

1Deselect wireless interface enabled.

Note All your wireless clients will be disconnected!

2Click Apply to apply your changes. The following screen appears:

3Click Save all to save your changes.

Note

•To enable the SpeedTouch™580 wireless access point:

1Click Enable to enable the wireless interface.

Note The Access Point Settings table is shown

2Click Save all to save your changes.

Note You can also enable your wireless interface by pressing the front panel button for 10 seconds until the WLAN LED goes on. If these settings need to be saved on persistent memory, browse to the web pages and click Save all to save your changes.

E-DOC-CTC-20040123-0001 v3.0

57