7 Support

7.1 SpeedTouch™ Wall Mount

Wall mount The SpeedTouch™580 can be wall-mounted by using two screws and the molded mounting brackets on the bottom of the SpeedTouch™580. You must provide the screws.

To mount the SpeedTouch™580 on a wall or other vertical surface:

1Drill 2 holes in the wall or other vertical surface where you want to place the SpeedTouch™580. Keep a space of 143 millimeters between the 2 holes.

2Install the two screws. The screws should protrude 5 millimeters from the surface of the wall.

3Hang your SpeedTouch™580 on the wall using the mounting brackets.

Note If you install the SpeedTouch™580 onto drywall, use hollow wall- anchors to secure the screws. If the screws are not properly anchored, the strain of the cables connected to the SpeedTouch™580 rear panel connectors could pull the SpeedTouch™580 from the wall.

84

E-DOC-CTC-20040123-0001 v3.0