6 SpeedTouch™ NAPT Manager
Configuration of the SpeedTouch™
Proceed as follows:
1As soon as the NAPT Manager has detected your SpeedTouch™ device you can proceed with the configuration procedure.
Note The SpeedTouch™ may be protected by a system password. You must provide user name and system password to continue with the configu- ration.
2The following page lists the application hosts currently configured on the Speed- Touch™:
Click Add to enter a new application host.
3The Add Port Mapping window appears. If you want to:
•Enter a port mapping for a specific application:
Click the Basic tab. Select an application in the Application list and enter the Host IP Address in the appropriate fields.
By default, the IP address of the PC from which you are running the NAPT Manager will be taken as host IP address. To add a NAPT entry for another PC, you must change the proposed IP address.
80 | |
|