3 SpeedTouch™ Configuration Setup
7The SpeedTouch™ Setup Wizard will search for the SpeedTouch™ on the net- work. The following window shows the detection progress:
8The SpeedTouch™ Setup Wizard should find your SpeedTouch™ device on the local network. This is indicated by the following window:
If more than one device is found, a list of available devices will be provided. If this is the case, select your SpeedTouch™ device (SpeedTouch™580) and click Next.
Note If the Setup wizard does not find any SpeedTouch™ on the network an error window appears. In this case check that:
•The SpeedTouch™ is turned on and fully initialized.
•Your PC has a valid IP address (i.e. any IP address but 0.0.0.0).
•No dedicated firewall device or router is placed between your PC and the SpeedTouch™.
•No personal firewall software is running on your PC.
Note It is possible that your PC isn’t correctly connected to the Speed- Touch™580. In this case check that:
•The WLAN client is correctly associated with the Speed- Touch™580 WLAN as described in “2.3.1
•Your USB drivers are correctly installed if you are connected through USB.
To repeat the search for your SpeedTouch™, click Back and proceed with step 7 of this procedure.
9Click Next to start the configuration procedure as described below.
27 | |
|