3 SpeedTouch™ Configuration Setup
Additional configuration Some additional configuration may be needed:
•MS Windows IP configuration
Most Service profiles will enable the SpeedTouch™ DHCP server. Since by default a PC’s Ethernet interface is configured for obtaining its IP configuration dynami- cally (DHCP client), in most cases, no additional configuration is required.
To make sure that all PCs are configured as expected (DHCP or fixed IP addresses):
1Run the SpeedTouch™ Setup Wizard on every PC that must connect to the WLAN.
2Select Change the LAN configuration.
3Follow the instructions.
Note For fixed IP configurations, or other advanced settings, please follow the instructions provided by your Service Provider or network admin- istrator.
•USB Configuration
If you are going to use the USB port as if it was an extra wired ethernet port, you will need to install the USB Remote NDIS drivers. See “ Installing the Speed- Touch™ USB connection” on page 13 for more information.
•Wireless Settings
When running the SpeedTouch™ Setup wizard, the SpeedTouch™ wireless access point settings will be set to their default values. You might need to
For additional security of your wireless network it is recommend to “personalize” your SpeedTouch™ wireless access point settings. See “2.3 Wireless Connection Setup” on page 16 for more information.
30 | |
|