7 Support

On Mac OS X Proceed as follows:

1Insert the SpeedTouch™ Setup CD-ROM in your PC's CD-ROM drive.

2Open the CD-ROM and browse to the osx folder.

3In the osx folder double-click upgradeST.pkg to install the SpeedTouch™ Upgrade application.

Note The installation wizard may prompt you for authentication. If this is the case, click to enter your credentials.

Note If your computer runs Mac OS X v10.3, your computer may prompt you to run a program to determine if the installer package can be installed. If this the case, click Continue.

4After installation go to the Applications > SpeedTouch folder on the system startup disk (usually the location where you installed the SpeedTouch™ Upgrade application) and double-click upgradeST to start the

SpeedTouch™ Upgrade Wizard.

5The Choose Language window prompts you to select a language. Select the language of your choice and click OK.

Note The selected language will also be used as default language in the SpeedTouch™ web pages. See “ Language” on page 75 for more infor- mation on how to change the web page language.

See “ Upgrade procedure” on page 89 to continue.

88

E-DOC-CTC-20040123-0001 v3.0