5 SpeedTouch™ Web Interface

To enable level 2 - WPA-PSK

1Select the entry Security level 2 - WPA-PSKwhich allows you to pro- ceed with the following window:

2Define your passphrase.

Note The passphrase must consist of 8 to 64 ASCII characters.

3Select an encryption method.

Note TKIP is the encryption as specified in the WPA standard. It is designed to be implemented by a firmware upgrade on legacy hardware. AES encryption offers stronger security, but is not part of the WPA -although it will become part of the future standard -WPA2.

4Optionally, change the rekeying interval.

Note The security keys used by each associated station are periodically changed for greater security. The interval between key refresh can be set to an integer number of seconds. If set to 0, the keys are not refreshed.

5Click Apply to apply the WPA-PSK settings.

Note The colour of the WLAN LED will change to green.

6Reconfigure your wireless client(s) to use the changed settings.

7Click Save all to save your changes to persistent memory.

E-DOC-CTC-20040123-0001 v3.0

59