5 SpeedTouch™ Web Interface
System Log Click this link to view the System Log page.
This page allows you to view the activity on the SpeedTouch™ since power on:
System log messages are used to provide a historical overview of events, errors, and messages generated during SpeedTouch™580 operation. The System Log web page allows you to overview all syslog messages the SpeedTouch™580 generated since its last reboot. By default the table is automatically refreshed every 30 seconds and shows all system log messages.
•Select View All to view all system log messages the SpeedTouch™580 has gener- ated.
•Select View Important Only to view messages the SpeedTouch™580 gener- ated to notify a important system events:
•Warnings
•Error conditions
•Critical conditions
•Alerts, requiring immediate actions to solve
•Emergency conditions, notifying the SpeedTouch™580 being unusable for normal service.
•Select View Critical Only to view all critical messages, the SpeedTouch™580 generated to notify an event that may have caused severe changes to the Speed- Touch™580's operational state:
•Critical conditions
•Alerts, requiring immediate actions to solve
•Emergency conditions, notifying the SpeedTouch™580 being unusable for normal service.
If you click Stop AutoRefresh, the automatic refresh of the table is stopped. An extra menu allows you to configure the refresh rate in seconds (30 seconds by default). Click AutoRefresh to apply your changes and to start automatic update of the table (using the new refresh rate).
64 | |
|