3 SpeedTouch™ Configuration Setup
Configuration of the SpeedTouch™ (and PC)
Proceed as follows:
1As soon as the SpeedTouch™ Setup wizard has detected your SpeedTouch™ device, you can proceed with the configuration procedure.
Note If the SpeedTouch™ has been configured before:
•It may be protected by a system password. You must provide this password before you can view the device details or continue with the configuration.
•You will be asked to choose between reconfiguring your Speed- Touch™ or changing your Local Area Network configuration. Select the Reconfigure the SpeedTouch™ option and click Next.
2The following window invites you to select the appropriate service for your Inter- net connectivity:
Select Region, Provider and Service as specified by your Service Provider and click Next to continue.
Note If the Service Provider has included a separate disk with a dedicated Service profile, click Have Disk to navigate to the location of the appropriate Service template file.
3Subsequent screens will guide you through the configuration setup of both the SpeedTouch™ and your PC. Follow the instructions and enter the required infor- mation whenever needed. The requested information will depend on the selected Service profile and should be provided by your Service Provider.
Click Next whenever requested.
4The SpeedTouch™ Setup wizard will update the SpeedTouch™ configuration and your PC’s configuration according to the Service profile. You can follow the config- uration progress in following window:
28 | |
|