5 SpeedTouch™ Web Interface

To disable any security (No security)

1Select the entry Security level 0 which allows you to proceed with the fol- lowing window:

2Click Apply to apply your changes.

Note The colour of the WLAN LED will change to red.

3Reconfigure your wireless client(s) to use the changed settings.

4Click Save all to save your changes to persistent memory.

Note The WEP and/or WPA-PSK settings will be preserved in case you want to switch on security again later.

Select Security to:

•View the current Access Control List (ACL) and ACL Access Mode. Via this table you can manually add or delete wireless clients and configure how wire- less clients are allowed to connect to the SpeedTouch™580 WLAN.

The following table is shown:

Following ACL Access modes exists.

•New stations are allowed (automatically).

•No new stations are allowed.

•New stations are allowed (via registration).

60

E-DOC-CTC-20040123-0001 v3.0