3 SpeedTouch™ Configuration Setup
3.2Operating System Independent SpeedTouch™ Configuration Setup
Supported Systems As the SpeedTouch™ is
Prerequisites Make sure that:
•The SpeedTouch™ device is correctly set up and turned on as described in “1.2 Setting Up the SpeedTouch™” on page 9.
•The SpeedTouch™ device is in its default configuration state.
See “7.3 SpeedTouch™ Default Configuration” on page 95 for resetting your device.
•If you want to configure the SpeedTouch™ over the wireless network, the computer’s WLAN client is installed and correctly associated with the Speed- Touch™ wireless network according to “2.3.1
•The computer’s Operating System supports TCP/IP and it’s Ethernet interface is configured for obtaining its IP configuration dynamically.
Note In case of problems with DHCP you can also configure the computer’s Ethernet or USB interface with a static Net10 private IP address, e.g. 10.0.0.1, 10.0.0.2, but make sure NOT to use the 10.0.0.138 IP address as this is the default IP address of the SpeedTouch™.
•Your web browser is able to run Javascripts.
SpeedTouch™ | SpeedTouch™ Easy Setup consists of two parts: | |
Easy Setup | • | |
| ||
| • | Additional configuration (if needed) |
31 | |
|