5 SpeedTouch™ Web Interface
DHCP The Dynamic Host Configuration Protocol (DHCP) page allows you to:
•Click The DHCP Server tab to access the DHCP server pages.
•Select Server Config to enable/disable the SpeedTouch™ (Auto)DHCP server:
Depending on the DHCP server status, following Status message can be displayed:
•Scanning for other DHCP server
In case the DHCP server and its Auto DHCP feature are enabled, during local network probing on the SpeedTouch™ Ethernet interface eth0.
•DHCP server stopped
In case the DHCP server and its Auto DHCP feature are enabled, and a concurrent DHCP server was found during probing, thus causing its own DHCP server to be stopped and a DHCP client on the Speed- Touch™ Ethernet interface eth0 be created and activated.
•DHCP server started
In case the DHCP server and its Auto DHCP feature are enabled, and no concurrent DHCP server was found during network probing, thus starting its own DHCP server on the SpeedTouch™ Ethernet interface eth0.
•DHCP server running
In case the SpeedTouch™ DHCP server is enabled by default (without DHCP client)
•DHCP client
In case the SpeedTouch™ server is disabled by default, and a DHCP client is running on the SpeedTouch™ Ethernet interface eth0.
•No DHCP
In case the SpeedTouch™ server is disabled by default and the Speed- Touch™ Ethernet interface eth0 IP address is statically assigned.
70 | |
|