7 Support

7.2.1Upgrade via the SpeedTouch™ Upgrade Wizard

Introduction

Starting the

SpeedTouch™ Upgrade

wizard

On MS Windows Operating Systems

The procedures described in this section are valid only in case:

•You run a MS Windows Operating System or Mac OS X.

•Your SpeedTouch™ and computer are properly connected:

•Through Ethernet or USB in case you run an MS Windows OS

•Through Ethernet in case you run Mac OS X

Note It is not possible to upgrade your modem over a wireless connection.

•The new system software file is of the type bant-d_XX427x.bin, e.g. bant-d_AA427A.bin.

During the upgrade procedure in most cases configuration settings are backed up by the wizard and restored after uploading the system software.

Depending on your Operating System, you must start the SpeedTouch™ Upgrade wizard as follows:

Topic

Page

 

 

On MS Windows Operating Systems

86

 

 

On Mac OS X

88

 

 

Proceed as follows:

1Insert the SpeedTouch™ Setup CD-ROM in your computer’s CD-ROM drive. The SpeedTouch™ CD Browser will start automatically.

Note If the SpeedTouch™ CD Browser window does not appear auto- matically, click Run on the Start menu and enter the following path: D:\Menu.exe where D stands for the drive letter of your CD-ROM drive.

2The Choose Language window prompts you to select a language. Select the language of your choice and click OK.

Note The selected language will also be used as default language in the SpeedTouch™ web pages. See “ Language” on page 75 for more infor- mation on how to change the web page language.

86

E-DOC-CTC-20040123-0001 v3.0