Scanning Originals with the Network TWAIN Scanner

Installing the TWAIN Driver from the Supplied CD-ROM

This section explains how to install the TWAIN driver on a client computer from the supplied "Scanner Driver and Utilities" or "Scanner Driver/Font Manager and Utilities" CD-ROM.

To use the network TWAIN scanner, you must install the TWAIN driver on a client computer.

A Start Windows, and then insert the CD-ROM labeled "Scanner Driver and Utilities" or "Scanner Driver/Font Manager and Utilities" into the CD-ROM drive of the client computer.

The installer is automatically started.

B

C

5

Click [TWAIN Driver].

The installer of the TWAIN Driver starts. Follow the instructions.

Note

❒Before you start the installation, check the system requirements for the TWAIN driver. For details about the system requirements, see "Software Supplied on CD-ROM".

❒You can install the software using the auto-run program. For details about the auto-run program, see "Auto-Run Program".

❒If the installer does not start automatically, see "Auto-Run Program".

❒When the installation is complete, a message about restarting the client computer may appear. In this case, restart the client computer.

❒After the installation is complete, a folder with the name of the machine in use is added in [Programs] or [All Programs] on the [Start] menu. Help can be displayed from here.

❒Notes on using the network TWAIN scanner are provided in "Readme.txt". Be sure to read them before use.

96