Scan Settings When Using Twain Scanner

❖ADF

Original Orientation

TWAIN Scanner Control Dialog Box Key

top edge of original placed first

top edge touches rear of ADF

Note

❒Originals are normally rectangular () or horizontally long (). However, the table above uses squares to make original orientation easier to understand. Even if the actual shape of the original is different, the combination of original orientation and the orientation specified on the scanner driver does not change.

❒For details about the Scanner Control dialog box, see the TWAIN driver Help.

 

 

 

❒ Depending on the settings, originals of different sizes are scanned differently.

6

 

 

 

When Scanning Originals of Mixed Sizes Using TWAIN Scanner

This section explains the differences between scanning mixed-size originals using the TWAIN scanner and normal scanning.

•If [Auto detect(Mixed-size)]is selected in the [Original Size:] list, the machine de- tects the length of each same-width original and then scans them.

•If [Auto detect(Uni-size)]is selected in the [Original Size:] list, the machine detects the size of the first original of the batch and scans all subsequent originals at that size.

131