Basic Operation for Delivering Files

Basic Operation for Delivering Files

This section describes the basic operation for delivering scan files using the network delivery scanner.

Important

You must register destinations and senders in advance using the ScanRouter delivery software installed on the delivery server.

A Make sure that no previous settings remain.

If a previous setting remains, press the {Clear Modes} key.

B If the E-mail screen or Scan to Folder screen appears, switch to the network

delivery scanner screen.

 

4

For details, see "Switching to the Network Delivery Scanner Screen".

 

C Place originals.

D If necessary, press [Scan Settings] to specify scanner settings such as scan type, resolution, image density, or scan size.

For details, see "Various Scan Settings".

E If necessary, press [1 Sided Orig.] or [2 Sided Orig.] to scan one or both sides of the originals.

For details, see "Setting for Scanning Sides of Originals".

F If necessary, press [Original Feed Type] to specify settings such as original ori- entation.

For details, see "Setting of Original Feed Type".

G Specify the destination.

You can specify multiple destinations.

For details, see "Specifying Delivery Destinations".

H If necessary, press [Attach Sender's Name] to specify the sender.

For details, see "Specifying the Sender".

81