Basic Network TWAIN Scanner Operation

Basic Network TWAIN Scanner Operation

This section describes the basic operation for scanning with the network TWAIN scanner.

Important

To use the network TWAIN scanner, a TWAIN-compliant application, such as DeskTopBinder and the TWAIN driver must be installed on the client com- puter.

The following procedure uses Windows XP and DeskTopBinder Lite by way of example.

A On the [Start] menu, point to [All Programs], point to [DeskTopBinder], and then click [DeskTopBinder].

B On the [Tools] menu, click [Scanner Settings...].

 

5

C Click [Select Scanner Driver...].

 

D Select the name of the machine you want to use in the list, and then click

 

[Select].

 

E Click [OK].

F Place originals.

G On the [File] menu, point to [Add Document], and then click [Scan...] to display the Scanner Control dialog box.

A dialog box that is used to control a scanner using the TWAIN driver is referred to as the Scanner Control dialog box.

H Make settings according to such factors as the type of original, type of scan- ning, and orientation of the original.

For details, see the TWAIN driver Help.

I In the Scanner Control dialog box, click [Scan].

Depending on the security setting, if you press [Scan], a dialog box for entering the user name and password may appear.

If there are more originals to be scanned, place the next original, and then click [Continue].

J K

If there are no more originals to be scanned, click [Complete].

On the [File] menu, click [Exit].

Enter the document name, and then click [OK].

The DeskTopBinder viewer closes and the image is stored in DeskTopBinder Lite.

97