Various Scan Settings

Scan Settings When Using Twain Scanner

This section explains how to specify original orientation and scan setting for a bundle of mixed size originals when using the TWAIN scanner.

Setting Original Orientation on the TWAIN Scanner

To correctly display the top/bottom orientation of the scanned original on a client computer, the placement of the original and the settings made in the Scanner Control dialog box must match.

A Open the Scanner Control dialog box.

For details about how to open the Scanner Control dialog box, see "Basic Network TWAIN Scanner Operation".

 

B In the [Original Scan Method:] list, select the place where the original is placed.

 

C In the [Orig.Orientn.:] list, select [

 

] or [

].

 

 

 

D In

the [Orientation:]

list, select

[

/

], [

/

],

6

[

/

], or [

/

].

 

 

 

E If an original is placed in the ADF, from the drop down menu of [Scan Settings ], select [1 Sided], [2 Sided(Top to Top)], or [2 Sided(Top to Bottom)].

Reference

p.97 “Basic Network TWAIN Scanner Operation”

Placing Originals

The following table shows the relationship between the original orientation and the Scanner Properties dialog box settings:

Exposure Glass

Original Orientation

TWAIN Scanner Control Dialog Box Key

top edge touches top left of exposure glass

This orientation is the TWAIN driver's standard setting. Place originals in this orientation normally.

top edge touches rear of exposure glass

130