Items for Specifying Scan Settings

E Specify Start Position (X2 and Y2) using the number keys, and then press the {q} key.

For example, set X2 to 30 mm and Y2 to 20 mm.

F Specify Scan Area (X3 and Y3) using the number keys, and then press the {q} key.

For example, set X3 and Y3 to 80 mm.

G Press [OK].

H Check Scan Area (X3 and Y3) displayed in the [Custom Size] field, and then press [OK].

6

Note

To scan an original that is smaller than 140 mm, make settings as though you were scanning a section of an original that is larger than 140 mm.

107