Basic Network TWAIN Scanner Operation
Basic Network TWAIN Scanner Operation
This section describes the basic operation for scanning with the network TWAIN scanner.
Important
❒To use the network TWAIN scanner, a
The following procedure uses Windows XP and DeskTopBinder Lite by way of example.
A On the [Start] menu, point to [Program], point to [DeskTopBinder], and then click [DeskTopBinder].
B On the [Tools] menu, click [Scanner Settings...]. |
| |
5 | ||
C Click [Select Scanner Driver...]. | ||
| ||
D Select the name of the machine you want to use in the list, and then click |
| |
[Select...]. |
|
E Click [OK].
F Place originals.
G On the [File] menu, point to [Add Document], and then click [Scan...] to display the Scanner Control dialog box.
A dialog box that is used to control a scanner using the TWAIN driver is referred to as the Scanner Control dialog box.
H Make settings according to such factors as the type of original, type of scan- ning, and orientation of the original.
For details, see the TWAIN driver Help.
I In the Scanner Control dialog box, click [Scan...].
Depending on the security setting, if you press [Scan...], a dialog box for entering the user name and password may appear.
If there are more originals to be scanned, place the next original, and then click [Scan...].
J K
If there are no more originals to be scanned, click [Complete].
On the [File] menu, click [Exit].
Enter the file name, and then click [OK].
The DeskTopBinder viewer closes and the image is stored in DeskTopBinder Lite.
103