Various Scan Settings

Changing the Registered Program Name

To change the name of a registered program:

A Press {Program}.

B Press [Change Name].

C Press the number of the program whose name you want to change.

6D Enter a new program name.

E Press [OK].

The new program name appears briefly, and then the initial screen reappears.

Registering Initial Values for Initial Display

This section explains how to set defaults for the initial screen, which appears when the machine is turned on or when settings are cleared or reset.

The following settings can be registered as defaults: Scan Settings, 1 Sided / 2 Sided Original, Mix 1 & 2 Sided, Top to Top / Top to Bottom, skip scanning back side of the last page, Divide, Original Orientation, File Type, Batch / SADF, Thin Paper, Store File, Preview, and Reception Notice.

A B

Make the necessary scan settings on the initial screen.

Press {Program}.

AMR009S

138