Specifying Scan to Folder Destinations
•[Exclude Words]: The names which do not contain an entered character or characters are targeted.
For example, to search for "ABC", enter "D".
Sending Files to a Shared Network Folder
This section explains how to specify the destination when sending files to a | 2 |
shared network folder. |
Important
❒The shared folder must have been created on the client computer in advance.
❒Depending on the operating system of the client computer, access to the shared folder may require authentication.
You can send a file to a shared folder over the network by any of the following methods:
•Enter the path to the destination directly
•Specify the path by browsing the network for the destination
Entering the path to the destination manually
You can enter the path to the destination folder manually.
A Press [Manual Entry].
B Press [SMB].
C Press [Manual Entry] on the right side of the path field.
The soft keyboard appears.
D Enter the path for the folder.
The following is an example of a path where the folder name is "user" and the computer name is "desk01": \\desk01\user.
Instead of specifying the destination using its path, you can also use its IPv4 address.
E Press [OK].
49