Various Scan Settings
Setting procedure of custom size when scanning part of an original
This section explains how to set a custom size for scanning an area within an original.
To scan part of the original, it is necessary to specify Original Size (X1 and Y1), Start Position (X2 and Y2), and Scan Area (X3 and Y3). Relationship of Original Size, Start Position, and Scan Size differs depending on the original orientation and set position. Make settings correctly by referring to the following examples.
❖Example 1
Original is placed in the 
or 
orientation on the exposure glass or in the
ADF
6
ALQ014S
❖Example 2
Original is placed in the 
or 
orientation on the exposure glass or in the
ADF
ALQ015S
Examples 1 and 2 (above) explain the procedure for scanning the "R" area of the original.
110