Various Scan Settings
G After all originals are scanned, press {q}.
Storing or transmission starts.
Note
❒If [Batch] is selected, originals can be scanned using the ADF.
❒When scanning originals using the exposure glass, depending on the set- tings for [Wait Time for Next Orig.: Exposure Glass] under [Scanner Features], the machine can wait for additional originals even if [Batch] is not selected in
[Original Feed Type]. For details about [Wait Time for Next Orig.: Exposure Glass], see General Settings Guide.
❒If, under [Scanner Features], [Set Wait Time] is set for [Wait Time for Next Orig.: Exposure Glass] or [Wait Time for Next Original(s): SADF], place additional orig- inals within the specified time. When the countdown ends, transmission or
storage starts automatically. To start transmission or storage before the countdown is completed, press {q}. Countdown is canceled if Scan Set-
tings or other settings are changed in the meantime. Place additional orig- inals, and then press {Start}. The machine scans the originals and the countdown is resumed. For details about [Wait Time for Next Orig.: Exposure Glass] and [Wait Time for Next Original(s): SADF], see General Settings Guide.
| ❒ If [SADF] is selected, scanning from the exposure glass is enabled after | |
6 | ||
scanning from the ADF. If this happens, you must press {Start} to start | ||
| ||
| scanning. |
❒To switch the scanning setting for additional originals to [1 Sided Original] after scanning one side of the last page of a batch of
Reference
126